Electric Rubber cutting machine for Truck, Race Car passenger tire cutter

Description

Tire Re groover,electric Rubber cutting machine,Professional Tyre Regroover for Truck, Race Car passenger tire cutter cheaper
Application：
The tire carving machine is used to engrav various patterns on the surface of the tire or other surfaces to enhance the
friction and aesthetics of the tire on the ground.
Power supply voltage:
220V
Output voltage:
adjustable four gear
Power usage：
350W
Dimensions：
32*22*24CM
Material:
Alloy
Use and maintenance:
1. The user selects the corresponding blade according to the required cross section of the pattern and presses it on the head of the carving machine. With the blade facing outwards, turn on the power and adjust the output voltage range from low to high. The voltage cannot be too high, otherwise the props may be overheated and damaged.
2. When engraving, use even force. Move the engraving machine forward according to the pattern track. After the engraving is completed, remove the cutter head from the tire. At this time, the contacts in the engraving machine are disconnected and the heating of the tool is stopped.
3. Turn off the power after use, turn the voltage of the transformer to the lowest level for the next use, and remove the rubber left on the cutter head.
4 This machine has the characteristics of convenient operation, high quality carving, good equipment performance, small size and easy maintenance.
Information on safety technology:
1. The power supply needs to be installed with a leakage protector
2. Turn off the power before repairing
3. Disconnect the power after working