Drill Master 61311 - 1/4 Sheet - 5 Sandpaper Bundles - Available in 17 Grits

Description

Drill Master 61311
- 1/4 Sheet
(4.5x5.5")
- PrePunched -
5 Sheet Sandpaper Bundles - Available in 17 Different Grits
The Best Sanding Sheets for your
Drill Master 61311
1/4 Sheet Sander
Select the grits you need and create the perfect sanding sheet combination!
Our Sanding Sheets Offer Unmatched Sanding Performance and Grit Selection
Pre-Cut to a 1/4 Sheet (4.5x5.5") size for a perfect fit
every time
Pre-Punched sheets provide the optimal hole size and alignment for maximum through pad dust collection
'Stay Put' No-Slip design provides enhanced gripping for reduced sandpaper slippage.  This is a true
Clamp It And Forget It
solution that virtually eliminates sandpaper slippage by taking advantage of
Hook-and-Loop sanding sheet retention coupled with tension spring clamp mounting
'Place and Clamp' mounting method means no more fussing around trying to get the sandpaper even under each retention clamp.  Simply place the sanding sheet on the bottom of the sander, aligning the dust collection holes with the pad holes, and clamp
Sanding Sheets are made with Aluminum Oxide for longer lasting sanding performance
Wide variety of grits insures you have the right sanding sheets for every project.  Available grits include
40, 60, 80, 100, 120,150,180, 220, 240, 320, 400, 600, 800, 1000, 1200, 1500 and 2000
coarseness
To pick more than one grit bundle simply close the 'Item Added to Cart' window, select your next desired grit and quantity and add that to your cart. Continue adding desired grits and quantities to your cart until finished and then click the Checkout button
*
Drill Master
61311
Sander shown on any digital images is for reference purposes only and is not included with the sale of the sandpaper bundle
Grit
Coarseness
Guide
Coarse - 40 Grit - Good for fast removal of material
Medium - 60 to 80 Grit - Good for sanding bare surfaces in preparation for finishing and for removal of previous finishes
Fine - 100 to 120 Grit - Good for additional preparation of surfaces before applying finishes
Very Fine - 150 to 220 Grit - Good for final preparation of surfaces before applying finishes
Very Fine Finish Sanding - 240 to 320 Grit - Good for sanding finishes between coats
Extra Fine - 400 to 600 Grit - Good for initial polishing of finishes
Super Fine - 800 to 1200 Grit - Good for final polishing of finishes
Ultra Fine - 1500 to 2000 Grit - Good for final polishing of thick finishes