Blackmagic Design Video Assist 7" 12G-SDI/HDMI HDR Recording Monitor Retail 5

Description

BRAND NEW UNOPENED! I am clearing out stock as I close out my technology consulting firm. My loss is your gain. Good Luck! PLEASE READ CAREFULLY BEFORE BIDDING
Add professional monitoring and high-quality recording to virtually any camera with the
Video Assist 7" 12G-SDI/HDMI HDR Recording Monitor
from
Blackmagic Design
. It features a bright 7", 1920 x 1200 display with 2500 cd/m² brightness to help you frame and focus your shots, and provides 12G-SDI and HDMI inputs for recording the video output from professional and consumer cameras. The monitor also features two balanced 3-pin mini-XLR inputs with 48V phantom power support for crisp audio recording. You can monitor and record HDR video up to DCI 4K, UHD 4K, 2K, or HD 10-bit 4:2:2 and up to 16 channels of embedded 24-bit 48 kHz audio.
The Video Assist records using dual high-speed UHS-II SD slots to SDHC/XC memory cards. You can also use the USB 3.1 Gen 1 Type-C port to record to an external drive, as well as use it for configuring and upgrading the monitor. Video is recorded using industry-standard Apple ProRes (HQ, 422, LT, or Proxy) and Avid DNxHD and DNxHR codecs.
The monitor's touchscreen interface allows you to adjust settings and access monitoring features such as histogram, waveform, RGB parade, vectorscope, and many more scopes and exposure tools. There is also a tally light on top of the monitor to indicate that it is operating and recording. To power the monitor, a 12V power adapter is included. It also has dual battery slots on the rear to power the monitor using separately available Sony L-series type batteries.
When you update the firmware to version 3.3, Blackmagic has introduced USB webcam output, so the monitor can send a full 1080p signal to your computer over USB in a streaming-friendly format. Also added is audio monitoring channel selection. This 7" version also gains XLR audio mapping to different channels and XLR external timecode.
USB Webcam Output with Firmware Update 3.3
In firmware version 3.3, Blackmagic has introduced USB webcam output, allowing for the Video Assist to send a full 1080p signal to your computer over USB using a streaming-friendly format. Also added is audio monitoring channel selection. This 7" version also gains XLR audio mapping to different channels and XLR external timecode.
Bright 7" Full HD Display
The display features a bright 7" 1920 x 1200 display with 2500 cd/m² brightness for evaluating your shots. On-screen controls allow you to vary the brightness and contrast depending on the shooting situation.
4K Support
Monitor and record DCI 4K, UHD 4K, 2K, and HD resolutions with 10-bit 4:2:2 HDR support. 3D LUTs are also supported
12G-SDI and HDMI Connections
Video and audio are captured using 12G-SDI and HDMI 1.4 inputs, allowing you to record from professional cameras and camcorders, as well as popular DSLRs and mirrorless cameras. The 12G-SDI BNC input even allows you to monitor Ultra HD footage. Loop-through outputs are provided so you can simultaneously display the live video or recorded clips on larger screens like 4K, 2K, or HD broadcast monitors or HDMI projectors while you monitor and record on the Video Assist. Up to eight channels of audio are embedded in the output and can also be monitored on headphones using the 3.5mm stereo jack.
Power
A universal power supply is included so you can use the Video Assist anywhere using the 12 VDC input, or run off two Sony L-series type batteries in the dual battery slots.
Audio Input
The monitor also features two balanced 3-pin mini-XLR inputs with 48V phantom power support for crisp audio recording.
Touchscreen Interface
The display provides intuitive capacitive touchscreen controls. Swipe gestures make it simple and quick to show or hide settings, such as capture resolution and format, as well as screen brightness and contrast. You'll have access to additional controls, recording status, histogram, waveform, vectorscope, battery status, and more. The controls have a semi-transparent overlay, so you can still be able to keep an eye on every part of your shots.
10-Bit 4:2:2 ProRes & DNxHD Recording
The Blackmagic Video Assist records your video at the 10-bit 4:2:2 quality. Files are recorded to dual high-speed UHS-II slots using SDXC/HC cards in Apple ProRes (HQ, 422, LT, Proxy) or DNxHD and DNxHR codecs. These are industry-standard formats, so you can start editing immediately without having to convert the files.
Display
Panel Type
TFT LCD
Display Size
7.0" / 17.8 cm
Aspect Ratio
16:10
Touchscreen
Yes
Maximum Brightness
2500 cd/m
2
Pixels Per Inch (ppi)
323 ppi
Image Controls
Histogram, Picture-in-Picture, RGB Parade, Vectorscope, Waveform
Wi-Fi
None
I/O
Video
1 x
HDMI Type A (HDMI 2.0a) Input
1 x
BNC (12G-SDI) Input
1 x
HDMI Type A (HDMI 2.0a) Output
1 x
BNC (12G-SDI) Output
HDCP Support
No
Embedded Audio
HDMI: 8-Channel
SDI: 16-Channel
Audio
1 x
1/8" / 3.5 mm Headphone Output
2 x
Mini-XLR Mic/Line Input
Built-In Speaker
1
Power
1 x
Barrel Input
Other I/O
1 x
USB Type-C
1 x
LANC (2.5 mm)
Format Support
Video Format
SDI (10-Bit 4:2:2 RGB)
DCI 4K: 25/24/23.98
UHD 4K: 60/59.94/50/30/29.97/25/24/23.98
DCI 2K: 25/24/23.98
DCI 2K PsF: 25/24/23.98
1080p: 60/59.94/50/30/29.97/25/24/23.98
1080PsF: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
576i: 50
480i: 59.94
HDMI (10-Bit)
DCI 4K: 25/24/23.98
UHD 4K: 60/59.94/50/30/29.97/25/24/23.98
1080p: 60/59.94/50/30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
576i: 50
480i: 59.94
Gamma Curve
HDR-HLG, Rec2020, Rec709
Recording
Pre-Roll Record
None
Encoding Formats
Up to 4096 x 2160
ProRes 422, HQ, LT, Proxy 10-Bit 4:2:2 at up to 60 fps
DNxHD 145, 145 MXF, 220x, 220x MXF, 45, 45 MXF, HQX, LB, LB MXF, SQ, SQ MXF 10-Bit 4:2:2 at up to 60 fps
Maximum Audio Tracks
16
Recording Media
2 x
SDXC (UHS-II)
Phantom Power
+48 V
Power
Battery Type
2 x
L-Series
Environmental
Operating Temperature
32 to 104°F / 0 to 40°C
Operating Humidity
0 to 90%
Storage Temperature
-4 to 113°F / -20 to 45°C
General
Dimensions
7.6 x 5.14 x 1.45" / 19.3 x 13.06 x 3.68 cm
Weight
29.1 oz / 824.99 g
Warranty Length
Limited 1-Year Warranty
Packaging Info
Package Weight
3.11 lb
Box Dimensions (LxWxH)
9.85 x 9.6 x 3.3"
Orders can not be cancelled
! Please be sure of your purchase and ask any questions before completing your order.
I make no guarantee of function, fit, size, structure or durability. Know the item you are buying. These are warrantied by Blackmagic Design not by me.
Know the condition of the item you are buying.
Returns are ONLY accepted for items that don't match the listed description. We are not responsible for buyers who don't read the description before making a purchase. Returns will not be accepted for any other reason.
Orders can only be sent to the Shipping Address entered on Ebay/PayPal during checkout.
All orders over 0 will require signature for delivery, no exceptions will be made. This is for both the protection of the buyer and the seller.
We will try to answer any questions within 1 business day
(not including Weekends or Shipping Holidays).
Please note the estimated delivery date when completing your purchase. If you need the shoes sooner, please contact us before purchasing. We can not control any delays due to weather or mail carrier error.
Tracking information will be uploaded to Ebay as soon as possible, which can be viewed under your Purchase History.
We are not responsible for any manufacturer defects. All items are from major retailers and are guaranteed to be 100% authentic regardless of condition stated.
International shipments will be sent through Ebay's Global Shipping Program. Please see any tracking information on your Ebay Buying page.